Shaft mounted gear reducer - cast iron

S - IS - PS - CS

Shaft mounted gear reducer - cast iron

  • S080pam112_CAM1 maxi
  • IS080_CAM1 maxi
  • CS080112_CAM1 maxi
  • S140-150
  • S140-150_motor
  • IS140-150

Specifically designed for applications involving conveyors or augers, these units are also suitable for a wide variety of industrial fields.
The S series shaft-mounted gearmotor, available in cast iron from size 050 to 125, offers a wide range of reduction ratios, ensuring maximum efficiency in all operating conditions.
The new S Series includes two new sizes, 140 and 150, to extend the shaft mounting to heavier applications.

Certifications Available (up to size 125): ATEX 2GD/3GD

Warranty: Two years from date of delivery. 

Characteristics
Range
Downloads
PRODUCT CHECK LIST
Request more info
Sizes: 050-060-080-100-125-140-150
  • Power from 0,12 kW up to 45 kW with three phase 4 pole motors
  • Reduction ratios between 4,06 and 394,69
  • Torque max 9.500 Nm
  • Admissible radial loads max 30.000 N
Sizes: 050-060-080-100-125
  • Universal casing
  • Versions: S... C  Foot-flange mounting / Hollow shaf - S... D Foot-flange mounting / Solid shaft - S...  L Foot-flange mounting / Shrink disc shaft
  • Gearing with 2 and 3 reduction stages
  • Modularity
  • Gears hardened and tempered with shaved or ground profile
  • Cases in EN-GJL-200 grey cast iron for high strength and optimized with FEM analysis
  • Excellent mechanical strength
  • Load capacity calculated to ISO 6336, DIN 3990 and AGMA 2001
  • Painted with RAL 5010  blue  epoxy-polyester powder 
Sizes: 140-150
  • Universal casing 
  • Versions:  S... C Foot-flange mounting / Hollow shaft, S... L Foot-flange mounting / Shrink disc shaft
  • Gearing with 2 and 3 reduction stages
  • Gears hardened and tempered with ground profile
  • Cases in EN-GJL-200 grey cast iron 
  • Load capacity calculated to ISO 6336, DIN 3990 and AGMA 2001
  • Gearboxes supplied without lubricant
  • Painted with RAL 5010  blue  epoxy-polyester powder

To enable us to identify the correct product for your requirements please complete the below form.

The highlighted fields are mandatory.

Required field
Required field
CUSTOMER INFO
  • Required field
  • Required field
  • Required field
  • Required field
  • Required field
  • Required field
APPLICATION DATA
Motor Type

Motor Information
Required field
Required field
Required field
Required field

Protection degree

Gearbox speed (rpm)

Speed range (rpm)

Required torque (max/average)

Description of the application

Stop-Starts/Hr (Qty) - Duty

Hours-Run/Day

Casing version

Gearbox mounting

Mounting position (see catalogue)

Loading (Please refer to the “Service Factor” paragraph on the catalogue)

Fr/Fa radial/axial load

Connection(direct, coupling, belt drive, chain...)

Minimum Service Factor required

Certifications/ Regulations required
ENVIRONMENT CONDITIONS

Presence of external heat sources ((from sun, environment and/or machines)

Installation environment
Type of atmosphere
The following information is useful and necessary to identify the correct product according to the European ATEX Directive 94/9/CE. Please, fill the blank spaces of this document. Important note: Motovario cannot supply products for Atex 1D/1G or Zone 0

Type of zone
GAS
DUST

Permitted surface temperature
GAS (Temperature class)

DUST

Motovario, if above information is provided, can confirm harmonization to EN1127-1 and from EN13463-1 to EN13483-8 for: H/HA Series - Helical gear reducers, B/BA Series - Helical bevel gear reducers, S Series - Shaft mounted gear reducers, NMRV/NMRV-P Series - Worm gear reducers.
In case of order, the information above must be provided to enable the supply of the product necessary certification, file number and data for the nameplate.
Contact us
Required field
Required field
Required field
Required field
Required field
Required field
Required field